Cardas Clear Tonearm Rewire Kit – Rhodium Clips
$96.00 – $110.00
Go all out with this Cardas Clear Tonearm Rewire Kit, with rhodium clips. This kit comes with everything you need to rewire your tonearm, and is the best tonearm wire Cardas makes. Contact us for custom lengths. If you prefer to have a pre-assembled kit with tinned wire ends for $250, contact us to place your order.
- Cardas Clear 34×4 AWG Braided Tonearm Wire
- Cardas PCC ER cartridge clips
- Cardas Quad Eutectic Solder
- Shrinkflex® Polyolefin Heatshrink Tubing
This kit includes:
Cardas Clear 34x4 AWG Braided Tonearm Wire | Ultra fine Grade 1, 99.9999% pure oxygen free copper with SPN clear coat (Litz), gauge sizes scaled to Golden Ratio proportions and Cross-field layer geometry. Ends are taped to prevent unraveling prior to installation.
Cardas PCC ER Cartridge Clips | set of four clips. Base metal is high copper content brass with rhodium plating. Fits most cartridge pins and tonearm pins (1mm and 1.2mm). Solderable end with flexible tip to grip pins.
Cardas Quad Eutectic Solder | includes 3” length of solder, more than enough to complete two rewire jobs. Cardas Quad-Eutectic rosin core solder contains tin, lead, silver, and copper. Melts at 365˚. This is the same solder used to terminate all Cardas cables.
Shrinkflex® Polyolefin Heatshrink Tubing | set of four pieces cut for tonearm wires, plus extra piece of black heatshrink you can cut in half to use at each end of the braided wire to prevent it from unwinding.
HOW TO USE:
Cardas manufactures Litz conductors. These conductors have an enamel coating on each strand that must be removed. This is best achieved using flux and a solder pot to tin the ends. If you haven't worked with Litz conductors, please view this video at Cardas Audio showing this technique. Failure to properly tin the wires will result in a conductor that does not perform correctly.
516 SE Gleneden Place
Bend, Oregon 97702
By appointment only