Shop

Cart

Audio-Technica AT-OC9XML

$599.00

Dual Moving Coil Cartridge

The AT-OC9XML Dual Moving Coil cartridge with Microlinear stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.

Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that increase the magnetic energy, and the nude Microlinear stylus on a boron cantilever that tracks the record groove with incredible accuracy, low distortion and high-transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Please Note: AT-OC9XML’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

2 in stock (can be backordered)

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Nude Microlinear stylus and boron cantilever provide lower distortion and high transient response
  • A neodymium magnet and a premium permendur yoke with high saturation flux density and outstanding magnetic properties further enhance the concentrated magnetic field of the coil gap
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Please Note: AT-OC9XML’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

 

Cartridge & Stylus
Frequency Response20-47,000 Hz
Channel Separation27 dB (1 kHz)
Vertical Tracking Angle20°
Vertical Tracking Force1.8-2.2 g (2.0 g standard)
Stylus ConstructionNude square shank
Recommended Load ImpedanceMin. 100 ohms (when head amplifier is connected)
Coil Impedance12 ohms (1 kHz)
DC Resistance12 ohms
Coil Inductance25 mH (1 kHz)
Output Voltage0.4 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance1.0 dB (1 kHz)
Stylus ShapeMicrolinear
Cantilever0.28 mm diameter nude boron
Static Compliance20 x 10-6 cm/dyne
Dynamic Compliance16 x 10-6 cm/dyne (100 Hz)
MountingHalf-inch
Cartridge Weight7.6 g
Dimensions17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories IncludedNon-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Body MaterialAluminum
ModelAT-OC9XML
Mounting FeatureHalf-inch mount
Stylus Curvature Radius2.2 x 0.12 mil
Stylus SizeNude square shank
Terminal PinsBrass
TypeDual Moving Coil
Weight7.6 g (0.3 oz)
Wire Used for CoilPCOCC
NotesMounting Feature: Threaded body

Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Reviews

There are no reviews yet.

Be the first to review “Audio-Technica AT-OC9XML”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Headquarters

516 SE Gleneden Place
Bend, Oregon 97702
(541) 799-9113

HOURS

Tuesday to Saturday
9 AM to 6 PM

By appointment only

Get connected